Alccofast (VT) – Tile Adhesive for Vitrified Tiles
Polymer-Modified Tile Adhesive for Vitrified Tiles
Alccofast (VT) is a polymer-modified cement-based tile adhesive for vitrified tiles, specially formulated for fixing vitrified tiles and other compatible tile types on suitable substrates. Its formulation is designed to provide reliable bonding for low-porosity tiles while supporting efficient thin-bed tile installation.
As part of the Alccofast tile adhesives range, Alccofast VT provides an application-focused solution for vitrified tile installations where consistent adhesion, controlled application and durable performance are required. It is suitable for specified interior and exterior wall and floor applications.
Key Features
- Designed for ceramic tiles: Alccofast CE is specifically formulated for suitable small and medium-sized ceramic tile applications.
- Reliable tile bonding: Provides suitable adhesion between compatible ceramic tiles and recommended substrates.
- Thin-bed application: Designed for controlled adhesive-bed application, helping support efficient material usage.
- Cement-based formulation: A professionally formulated cementitious tile chemical for suitable ceramic tile installations.
- Slip-resistant performance: Provides controlled tile positioning during installation, with slip specified at ≤ 0.5 mm.
- Consistent application: Pre-formulated dry material helps reduce variations associated with manually proportioning tile-fixing materials.
- Efficient installation: The product is designed for convenient preparation and application using the recommended method.
- Suitable for interior applications: Developed for specified internal wall and floor tile installations.
Technical Classification
IS 15477:2019
Type 1
EN 12004-1:2017
C1T
Technical Performance as per IS 15477
Tensile Adhesion Strength – Dry
≥ 0.50 N/mm²
Shear Adhesion Strength – Dry
≥ 1.00 N/mm²
Open Time
≥ 20 minutes
Adjustment Time
≥ 20 minutes
Slip
≤ 0.5 mm
Recommended Bed Thicknes
3 mm
Approx. Coverage
2.5–3 sq. ft./kg
Coverage
Alccofast CE provides an approximate coverage of 2.5–3 sq. ft./kg at a 3 mm bed thickness.
Actual coverage can vary depending on:
- Surface evenness
- Tile size
- Tile back profile
- Trowel size
- Adhesive thickness
- Application technique
- Substrate condition
For accurate project estimation, actual site conditions should be considered.
Recommended Substrates
Alccofast CE is suitable for application on compatible:
-
Cement plaster -
Suitable for prepared cement-plastered surfaces used for ceramic wall and floor tile installation. -
Cement concrete -
Can be used on properly prepared compatible concrete surfaces. -
Cement screed -
Suitable for compatible cement screed substrates after appropriate surface preparation.
The substrate should be sound, clean, stable, and free from dust, loose particles, oil, grease, and other contaminants before application.
How to Apply Alccofast CE for Ceramic Tile Installation
Prepare the Surface
Ensure the substrate is firm, clean, dry and free from dust, loose material, oil, grease and other contaminants. Repair uneven or damaged areas before starting tile installation.
Prepare the Adhesive
Mix Alccofast CE with the recommended quantity of clean water according to the product's technical instructions.
Mix Thoroughly
Mix until a smooth and homogeneous paste is achieved. Allow the mixture to stand for the recommended period and remix before application, where specified.
Apply with a Notched Trowel
Spread the adhesive evenly over the prepared substrate using an appropriate notched trowel to achieve the recommended adhesive-bed thickness.
Fix the Ceramic Tiles
Place the ceramic tiles over the adhesive while it is within the recommended open time. Press the tiles adequately to achieve proper contact and coverage.
Maintain the Recommended Adjustment Time
Tiles should be positioned and adjusted within the specified adjustment time.
Allow Proper Setting
Follow the recommended setting, curing and grouting requirements before proceeding with subsequent work.
Why Choose Alccofast CE for Ceramic Tiles?
- Reliable Bonding for Ceramic Tiles - Selecting the appropriate tile adhesives for ceramic tiles is important for achieving consistent installation. Alccofast CE is formulated specifically around the requirements of suitable ceramic tile applications.
- Controlled Thin-Bed Installation - The product is designed for thin-bed application, allowing contractors to apply a controlled layer of adhesive rather than relying on conventional thick-bed fixing methods.
- Convenient Site Preparation - Alccofast CE is supplied as a pre-formulated dry material. It requires the recommended quantity of water to be added before application, helping simplify material preparation at the site.
- Suitable for Wall & Floor Applications - The product is designed for specified interior wall and floor applications, giving contractors a practical ceramic tile bonding solution for compatible projects.
- Consistent Product Formulation - Manufacturing under controlled conditions helps provide consistent product characteristics from batch to batch when stored and used correctly.
Alccofast CE for Wall Tile Installation
When selecting the best tile adhesive for wall tiles, the adhesive should be matched to the tile type, tile size, substrate and installation conditions.
Alccofast CE is specifically designed for suitable ceramic tile applications and can be considered where a cement-based, thin-bed tile adhesive is required for compatible interior wall surfaces.
The substrate must be properly prepared, and the product must be applied according to its technical recommendations to achieve the intended bonding performance.
Alccofast CE for Home Renovation
For homeowners and contractors undertaking home renovation, replacing or installing ceramic tiles requires proper consideration of the existing substrate.
Before using Alccofast CE:
- Check the condition of the existing surface.
- Remove loose or deteriorated material.
- Ensure the substrate is properly cleaned.
- Verify compatibility between the tile and substrate.
- Select the appropriate adhesive-bed thickness.
- Follow the recommended mixing and application procedure.
This helps create a more controlled tile installation process.
Suitable Applications
Alccofast CE is designed for suitable ceramic tile applications, including:
Ceramic Wall Tiles
Suitable for fixing compatible ceramic wall tiles on recommended interior substrates. The thin-bed application helps provide a controlled adhesive layer for wall tile installation.
Ceramic Floor Tiles
The product can be used for suitable interior ceramic floor tile applications where the substrate and tile characteristics meet the product requirements.
Residential Tile Installation
Alccofast CE can be considered for suitable ceramic tile installation in homes, apartments, kitchens, living spaces, and other compatible interior areas.
Commercial Interior Projects
The product is suitable for specified ceramic tile applications in commercial interiors where consistent bonding and efficient installation are required.
Renovation Applications
For home renovation, Alccofast CE can be considered where compatible ceramic tiles are being installed on suitable prepared substrates.
Frequently Asked Questions
What is the best tile adhesive for wall tiles?
The right tile adhesive depends on the tile type, size, substrate and application conditions. Alccotech offers application-specific solutions for compatible wall tile installations.
Which tile adhesive is suitable for ceramic tiles?
Alccofast CE is designed for suitable ceramic tile applications and provides reliable bonding on recommended substrates.
Which tile adhesive is suitable for vitrified tiles?
Alccofast VT is formulated for suitable vitrified tile applications, offering reliable and consistent tile bonding.
What is the best tile adhesive for large-format tiles?
Alccofast SA is a specialised tile and stone adhesive designed for suitable natural stone and compatible large-format tile applications.
Which tile adhesive is suitable for natural stones?
Alccofast HF is a highly deformable tile adhesive designed for suitable large-format tile and stone applications requiring greater flexibility.
Can tile adhesive be used for exterior tiles?
Yes, selected Alccofast products are suitable for specified exterior applications. Product selection should consider tile type, substrate, moisture and environmental conditions.
What is the difference between tile adhesive and joint filler?
Tile adhesive bonds tiles or stones to the substrate, while joint filler or grout fills the spaces between installed tiles.
What is Alccofill EP used for?
Alccofill EP is an epoxy grout designed for suitable tile and stone joint-filling applications requiring enhanced durability and joint performance.
Which product is a waterproof tile joint filler?
Alccofill WP is a polymer-modified waterproof tile joint filler designed for suitable applications requiring water-resistant, non-shrink joints.
What is Alccofill CR?
Alccofill CR is a coloured waterproof tile joint filler designed to provide water-resistant joint performance with an attractive coloured finish.
Related Product
Alccofast VT – Tile Adhesive for Vitrified Tiles
Alccofast SA – Tile Adhesive for Stones
Alccofast HF – Highly Deformable Tile Adhesive
Alccofast S – Polymer-Modified Slurry-Based Tile Adhesive
Alccofill EP – Epoxy Grout
Alccofill WP – Waterproof Tile Joint Filler
